Sources

About this list

This page lists every document the site cites: standards, statutes, regulations, publisher catalog pages and government works. Each entry gives the designation, title, edition and publisher, how the site holds the document, the month a purchased copy was acquired, and the pages that cite it.

A purchased standard is held under the publisher's license, bought from its publisher or an authorized seller. Its text is read to extract facts and is never reproduced on the site. Links point to the publisher's official catalog or sales page, never to a copy of the document.

Bibliography

• 29 CFR 1910.332, 1910.332 - Training, current edition, OSHA. Held as: Government work. Publisher page. Cited by: Osha qualified person.
• 29 CFR 1910.333, 1910.333 - Selection and use of work practices, current edition, OSHA. Held as: Government work. Publisher page. Cited by: Insulation Resistance.
• 29 CFR 1910.399, 1910.399 - Definitions applicable to this subpart, current edition, OSHA. Held as: Government work. Publisher page. Cited by: Osha qualified person, Low-voltage circuit breakers, Insulation Resistance.
• ANSI C12.1-2026, ANSI C12.1-2026, 2026 edition, NEMA. Held as: Public page. Publisher page. Cited by: ANSI C12.1-2026.
• ANSI C12.1-2026, Electric Meters - Code for Electricity Metering, 2026 edition, NEMA. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Visual and Mechanical Inspection.
• ANSI/NETA ATS-2025, Acceptance Testing Specifications for Electrical Power Equipment and Systems, 2025 edition, NETA. Held as: Purchased single-user copy.Purchased 2026-06. Publisher page. Cited by: Liquid-filled transformers, Low-voltage circuit breakers, Insulation resistance tester, Dissipation factor, Arc Energy Reduction Performance, Battery Capacity Load Test, Battery Cell Voltage and Specific Gravity, Battery Charger Performance, Battery Intercell Connection Resistance, Battery Internal Ohmic Measurement, Bolted Connection Resistance, Bushing Power Factor and Capacitance, Cable Jacket Integrity, Cable Tan Delta, Capacitance Measurement, Circuit Breaker Timing and Travel, Commutator Bar to Bar Resistance, Contact Resistance, Continuity and Shield Continuity, Control and Functional Verification, CT Excitation and Saturation, Current Circuit Injection, DC System Ground Detection, Dielectric Frequency Response, Dielectric Withstand, Dissolved Gas Analysis, Dynamic Contact Resistance, Dynamic Winding Resistance, EMF Survey, Engine Generator Load and Performance, Engine Generator Safety Shutdowns, Fiber Optic Attenuation and Power, Fiber Optic OTDR Testing, Field Pole Voltage Drop, Fuse Resistance, Gas Blanket Oxygen Content, Ground Electrode Resistance, Ground Fault Protection Performance, Grounding Point to Point Continuity, Infrared Thermographic Survey, Instrument Transformer Burden, Instrument Transformer Ratio and Phase Angle, Instrument Transformer Secondary Grounding, Insulated Bearing Insulation Resistance, Insulating Liquid Quality Tests, Insulating Liquid Sampling, Insulation Power Factor Dissipation Factor, Insulation Resistance, Leakage Reactance, Meter Accuracy Verification, Motor Current Signature Analysis, Motor Overload Relay Trip, Motor Run Test Under Load, Motor Vibration Analysis, Network Protector Mechanism Tests, Partial Discharge Offline, Partial Discharge Online, Phase Rotation and Phasing, Polarity Test, Polarization Index and Dielectric Absorption, Power Factor Tip Up, Power Quality and Harmonic Survey, Primary Current Injection Trip Test, Protective Relay Element Tests, PV I-V Curve Tracing, PV String Voc and Isc, PV Wet Insulation Resistance, Recloser and Sectionalizer Operation, Relay Time-Delay Timing Test, Relay 21 Distance Test, Relay Volts per Hertz Test, Relay 25 Sync Check Test, Relay 27 Undervoltage Test, Relay 32 Directional Power Test, Relay 40 Loss of Field Test, Relay 46 Current Balance Test, Relay 46n Negative Sequence Test, Relay 47 Phase Sequence Test, Relay 49r Thermal Replica Test, Relay 49t Temperature Test, Relay 50 Instantaneous Overcurrent Test, Relay 50bf Breaker Failure Test, Relay 51 Time Overcurrent Test, Relay 55 Power Factor Test, Relay 59 Overvoltage Test, Relay 60 Voltage Balance Test, Relay 63 Sudden Pressure Test, Relay 64 Ground Detector Test, Relay 67 Directional Overcurrent Test, Relay 79 Reclosing Test, Relay 81 Frequency Test, Relay 85 Pilot Wire Monitor Test, Relay 87 Differential Test, Resistor and Coil Resistance, RTD Circuit Verification, SCADA and Communication Verification, SF6 Gas Quality, Surge Arrester and SPD Tests, Surge Comparison Test, Sweep Frequency Response Analysis, Synchronous Machine Field Application, System Function Testing, Time Domain Reflectometry, Transformer Core Insulation Resistance, Transformer Excitation Current, Transformer Turns Ratio, Trip and Close Coil Minimum Pickup, Trip Unit Secondary Injection, UPS Functional and Transfer Tests, Vacuum Interrupter Integrity, Vacuum Interrupter MAC Test, Visual and Mechanical Inspection, Winding Resistance, Zone Selective Interlocking.
• ANSI/NETA ATS-2025, ANSI/NETA Standards, 2025 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA ATS-2025 Standard for Acceptance Testing Specifications, Insulating Liquid Dielectric Breakdown.
• ANSI/NETA ATS-2025, ANSI/NETA ATS-2025 Standard for Acceptance Testing Specifications (PDF), 2025 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA ATS-2025 Standard for Acceptance Testing Specifications.
• ANSI/NETA ATS-2025, ANSI/NETA Standards Development, 2025 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA ATS-2025 Standard for Acceptance Testing Specifications.
• ANSI/NETA ECS-2024, Standard for Electrical Commissioning Specifications, 2024 edition, NETA. Held as: Purchased single-user copy.Purchased 2026-06. Publisher page. Cited by: Energization Checks, Infrared Thermographic Survey, Visual and Mechanical Inspection.
• ANSI/NETA ECS-2024, ANSI/NETA Standards, 2024 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA ECS-2024 Standard for Electrical Commissioning Specifications.
• ANSI/NETA ECS-2024, ANSI/NETA Standards Development, 2024 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA ECS-2024 Standard for Electrical Commissioning Specifications.
• ANSI/NETA ETT, ANSI/NETA Standards Development, 2026 edition, NETA. Held as: Public page. Publisher page. Cited by: NETA technician certification.
• ANSI/NETA MTS-2023, Maintenance Testing Specifications for Electrical Power Equipment and Systems, 2023 edition, NETA. Held as: Purchased single-user copy.Purchased 2026-06. Publisher page. Cited by: Liquid-filled transformers, Low-voltage circuit breakers, Low-resistance ohmmeter, Dissipation factor, Battery Capacity Load Test, Battery Cell Voltage and Specific Gravity, Battery Charger Performance, Battery Intercell Connection Resistance, Battery Internal Ohmic Measurement, Bolted Connection Resistance, Bushing Power Factor and Capacitance, Cable Jacket Integrity, Cable Tan Delta, Capacitance Measurement, Circuit Breaker Timing and Travel, Contact Resistance, Continuity and Shield Continuity, Control and Functional Verification, CT Excitation and Saturation, Current Circuit Injection, DC System Ground Detection, Dielectric Frequency Response, Dielectric Withstand, Dissolved Gas Analysis, Dynamic Contact Resistance, Dynamic Winding Resistance, EMF Survey, Engine Generator Load and Performance, Engine Generator Safety Shutdowns, Fiber Optic Attenuation and Power, Fiber Optic OTDR Testing, Field Pole Voltage Drop, Fuse Resistance, Gas Blanket Oxygen Content, Ground Electrode Resistance, Ground Fault Protection Performance, Grounding Point to Point Continuity, Instrument Transformer Burden, Instrument Transformer Ratio and Phase Angle, Instrument Transformer Secondary Grounding, Insulated Bearing Insulation Resistance, Insulating Liquid Quality Tests, Insulating Liquid Sampling, Insulation Power Factor Dissipation Factor, Insulation Resistance, Leakage Reactance, Meter Accuracy Verification, Motor Current Signature Analysis, Motor Overload Relay Trip, Motor Run Test Under Load, Motor Vibration Analysis, Network Protector Mechanism Tests, Partial Discharge Offline, Partial Discharge Online, Phase Rotation and Phasing, Polarity Test, Polarization Index and Dielectric Absorption, Power Factor Tip Up, Primary Current Injection Trip Test, Protective Relay Element Tests, Recloser and Sectionalizer Operation, Relay Time-Delay Timing Test, Relay 21 Distance Test, Relay Volts per Hertz Test, Relay 25 Sync Check Test, Relay 27 Undervoltage Test, Relay 32 Directional Power Test, Relay 40 Loss of Field Test, Relay 46 Current Balance Test, Relay 46n Negative Sequence Test, Relay 47 Phase Sequence Test, Relay 49r Thermal Replica Test, Relay 49t Temperature Test, Relay 50 Instantaneous Overcurrent Test, Relay 50bf Breaker Failure Test, Relay 51 Time Overcurrent Test, Relay 55 Power Factor Test, Relay 59 Overvoltage Test, Relay 60 Voltage Balance Test, Relay 63 Sudden Pressure Test, Relay 64 Ground Detector Test, Relay 67 Directional Overcurrent Test, Relay 79 Reclosing Test, Relay 81 Frequency Test, Relay 85 Pilot Wire Monitor Test, Relay 87 Differential Test, Resistor and Coil Resistance, RTD Circuit Verification, SCADA and Communication Verification, SF6 Gas Quality, Surge Arrester and SPD Tests, Surge Comparison Test, Sweep Frequency Response Analysis, Synchronous Machine Field Application, System Function Testing, Transformer Core Insulation Resistance, Transformer Excitation Current, Transformer Turns Ratio, Trip and Close Coil Minimum Pickup, Trip Unit Secondary Injection, UPS Functional and Transfer Tests, Vacuum Interrupter Integrity, Vacuum Interrupter MAC Test, Visual and Mechanical Inspection, Winding Resistance, Zone Selective Interlocking.
• ANSI/NETA MTS-2023, ANSI/NETA Standards, 2023 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA MTS-2023 Standard for Maintenance Testing Specifications.
• ANSI/NETA MTS-2023, ANSI/NETA Standards Development, 2023 edition, NETA. Held as: Public page. Publisher page. Cited by: ANSI/NETA MTS-2023 Standard for Maintenance Testing Specifications.
• Electrical Testing Reference editorial taxonomy, Electrical Testing Reference editorial taxonomy of test methods, 2026-10 edition, Electrical Testing Reference. Held as: Not recorded. Cited by: Liquid-filled transformers, Low-voltage circuit breakers, Dielectric absorption ratio, Polarization index, Low-resistance ohmmeter, Dissipation factor, Arc Energy Reduction Performance, Battery Capacity Load Test, Battery Cell Voltage and Specific Gravity, Battery Charger Performance, Battery Intercell Connection Resistance, Battery Internal Ohmic Measurement, Bolted Connection Resistance, Bushing Power Factor and Capacitance, Cable Jacket Integrity, Cable Tan Delta, Capacitance Measurement, Circuit Breaker Timing and Travel, Commutator Bar to Bar Resistance, Constant Current Regulator Output, Contact Resistance, Continuity and Shield Continuity, Control and Functional Verification, CT Excitation and Saturation, Current Circuit Injection, DC System Ground Detection, Dielectric Frequency Response, Dielectric Withstand, Dissolved Gas Analysis, Dynamic Contact Resistance, Dynamic Winding Resistance, EMF Survey, Energization Checks, Engine Generator Load and Performance, Engine Generator Safety Shutdowns, Fiber Optic Attenuation and Power, Fiber Optic OTDR Testing, Field Pole Voltage Drop, Fuse Resistance, Gas Blanket Oxygen Content, Ground Electrode Resistance, Ground Fault Protection Performance, Grounding Point to Point Continuity, Infrared Thermographic Survey, Instrument Transformer Burden, Instrument Transformer Ratio and Phase Angle, Instrument Transformer Secondary Grounding, Insulated Bearing Insulation Resistance, Insulating Liquid Acid Number, Insulating Liquid Color, Insulating Liquid Dielectric Breakdown, Insulating Liquid Interfacial Tension, Insulating Liquid Power Factor, Insulating Liquid Quality Tests, Insulating Liquid Sampling, Insulating Liquid Visual Examination, Insulating Liquid Water Content, Insulation Power Factor Dissipation Factor, Insulation Resistance, Leakage Reactance, Meter Accuracy Verification, Motor Current Signature Analysis, Motor Overload Relay Trip, Motor Run Test Under Load, Motor Vibration Analysis, Network Protector Mechanism Tests, Partial Discharge Offline, Partial Discharge Online, Phase Rotation and Phasing, Polarity Test, Polarization Index and Dielectric Absorption, Power Factor Tip Up, Power Quality and Harmonic Survey, Primary Current Injection Trip Test, Protective Relay Element Tests, PV I-V Curve Tracing, PV String Voc and Isc, PV Wet Insulation Resistance, Recloser and Sectionalizer Operation, Rectifier Converter Performance, Relay Time-Delay Timing Test, Relay 21 Distance Test, Relay Volts per Hertz Test, Relay 25 Sync Check Test, Relay 27 Undervoltage Test, Relay 32 Directional Power Test, Relay 40 Loss of Field Test, Relay 46 Current Balance Test, Relay 46n Negative Sequence Test, Relay 47 Phase Sequence Test, Relay 49r Thermal Replica Test, Relay 49t Temperature Test, Relay 50 Instantaneous Overcurrent Test, Relay 50bf Breaker Failure Test, Relay 51 Time Overcurrent Test, Relay 55 Power Factor Test, Relay 59 Overvoltage Test, Relay 60 Voltage Balance Test, Relay 63 Sudden Pressure Test, Relay 64 Ground Detector Test, Relay 67 Directional Overcurrent Test, Relay 79 Reclosing Test, Relay 81 Frequency Test, Relay 85 Pilot Wire Monitor Test, Relay 87 Differential Test, Resistor and Coil Resistance, RTD Circuit Verification, SCADA and Communication Verification, SF6 Gas Quality, Surge Arrester and SPD Tests, Surge Comparison Test, Sweep Frequency Response Analysis, Synchronous Machine Field Application, System Function Testing, Time Domain Reflectometry, Transformer Core Insulation Resistance, Transformer Excitation Current, Transformer Turns Ratio, Trip and Close Coil Minimum Pickup, Trip Unit Secondary Injection, UPS Functional and Transfer Tests, Vacuum Interrupter Integrity, Vacuum Interrupter MAC Test, Visual and Mechanical Inspection, Winding Resistance, Zone Selective Interlocking.
• FAA AC 150/5345-10H, AC 150/5345-10H, H edition, Federal Aviation Administration. Held as: Government work. Publisher page. Cited by: FAA AC 150/5345-10H, Constant Current Regulator Output, Control and Functional Verification, Dielectric Withstand, Protective Relay Element Tests, Visual and Mechanical Inspection.
• IEEE 43-2013, IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery, 2013 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery.
• IEEE 43-2013, Recommended Practice for Testing Insulation Resistance of Electric Machinery, 2013 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Insulation resistance tester, IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery, Insulation Resistance, Polarization Index and Dielectric Absorption.
• IEEE 450-2020, IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications, 2020 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications.
• IEEE 450-2020, Vented Lead-Acid Battery Maintenance, Testing and Replacement, 2020 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Battery Capacity Load Test, Battery Intercell Connection Resistance.
• IEEE 519-2022, IEEE Standard for Harmonic Control in Electric Power Systems, 2022 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard for Harmonic Control in Electric Power Systems.
• IEEE 519-2022, Harmonic Control in Electric Power Systems, 2022 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Power Quality and Harmonic Survey.
• IEEE 946-2020, IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications, 2020 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Recommended Practice for the Design of DC Power Systems for Stationary Applications.
• IEEE 946-2020, Design of DC Auxiliary Power Systems for Generating Stations, 2020 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Battery Charger Performance, DC System Ground Detection, Protective Relay Element Tests, Rectifier Converter Performance, Visual and Mechanical Inspection.
• IEEE C57.12.00-2021, IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers, 2021 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers.
• IEEE C57.12.00-2021, General Requirements for Liquid-Immersed Distribution, Power and Regulating Transformers, 2021 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Rectifier Converter Performance, Transformer Turns Ratio.
• IEEE C57.12.01-2020, IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers, 2020 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard for General Requirements for Dry-Type Distribution and Power Transformers.
• IEEE C57.12.01-2020, General Requirements for Dry-Type Distribution and Power Transformers, 2020 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Rectifier Converter Performance, Transformer Turns Ratio.
• IEEE C57.12.91-2020, IEEE Standard Test Code for Dry-Type Distribution and Power Transformers, 2020 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard Test Code for Dry-Type Distribution and Power Transformers, Dielectric Withstand.
• IEEE C57.13-2016, IEEE Standard Requirements for Instrument Transformers, 2016 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard Requirements for Instrument Transformers.
• IEEE C57.13-2016, Requirements for Instrument Transformers, 2016 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: CT Excitation and Saturation, Instrument Transformer Burden, Instrument Transformer Ratio and Phase Angle, Polarity Test, Visual and Mechanical Inspection, Winding Resistance.
• IEEE C57.13.1-2017, IEEE Guide for Field Testing of Relaying Current Transformers, 2017 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Guide for Field Testing of Relaying Current Transformers.
• IEEE C57.13.1-2017, Guide for Field Testing of Relaying Current Transformers, 2017 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: CT Excitation and Saturation, Instrument Transformer Burden, Instrument Transformer Ratio and Phase Angle, Insulation Resistance, Polarity Test, Winding Resistance.
• IEEE C57.13.6-2005, IEEE Standard for High Accuracy Instrument Transformers, 2005 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard for High Accuracy Instrument Transformers.
• IEEE C57.13.6-2005, Requirements for High-Accuracy Instrument Transformers, 2005 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Instrument Transformer Ratio and Phase Angle.
• IEEE C57.18.10-2021, IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers, 2021 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standard Practices and Requirements for Semiconductor Power Rectifier Transformers.
• IEEE C57.18.10-2021, Semiconductor Power Rectifier Transformers, 2021 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Insulation Resistance, Rectifier Converter Performance, Transformer Turns Ratio, Visual and Mechanical Inspection.
• IEEE SA, IEEE Standards Association, web page edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standards Association (IEEE SA).
• IEEE SA, IEEE SA - Celebrating Over A Century of Leadership in Standards, web page edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standards Association (IEEE SA).
• IEEE SA, IEEE SA - IEEE Standards Association Operations Manual, web page edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE Standards Association (IEEE SA).
• IEEE Technology Navigator, Dielectric losses (IEEE Technology Navigator topic page), web page edition, IEEE. Held as: Public page. Publisher page. Cited by: Dissipation factor.
• IEEE/IEC C57.15-2017, IEEE/IEC International Standard: Power transformers, Part 21: Standard requirements, terminology, and test code for step-voltage regulators, 2017 edition, IEEE. Held as: Public page. Publisher page. Cited by: IEEE/IEC International Standard: Power transformers, Part 21: Standard requirements, terminology, and test code for step-voltage regulators.
• IEEE/IEC C57.15-2017, Requirements, Terminology and Test Code for Step-Voltage Regulators, 2017 edition, IEEE. Held as: Purchased single-user copy.Purchased 2026-10. Publisher page. Cited by: Insulation Resistance, Leakage Reactance, Winding Resistance.
• NEMA, About NEMA, web page edition, NEMA. Held as: Public page. Publisher page. Cited by: Nema.
• NEMA PE 5-1997 (R2003), Utility-Type Battery Chargers, 1997 (R2003) edition, NEMA. Held as: Public page. Publisher page. Cited by: Utility-Type Battery Chargers.
• NETA, InterNational Electrical Testing Association, web page edition, NETA. Held as: Public page. Publisher page. Cited by: NETA (InterNational Electrical Testing Association).
• NETA, About the InterNational Electrical Testing Association, NETA, web page edition, NETA. Held as: Public page. Publisher page. Cited by: NETA (InterNational Electrical Testing Association).
• NETA accreditation, NETA Accreditation Overview, web page edition, NETA. Held as: Public page. Publisher page. Cited by: NETA Accredited Company.
• NETA technician certification levels, NETA Technician Certification Levels, web page edition, NETA. Held as: Public page. Publisher page. Cited by: NETA technician certification, Neta level 1, Neta level 2, Neta level 3, Neta level 4.
• NFPA 70, NFPA 70, National Electrical Code (NEC) (2026), 2026 edition, NFPA. Held as: Public page. Publisher page. Cited by: NFPA 70, National Electrical Code (NEC).
• NIST SI Units, SI Units, web page edition, NIST. Held as: Government work. Publisher page. Cited by: Ohm.
• NIST SP 811, NIST Guide to the SI, Chapter 4: The Two Classes of SI Units and the SI Prefixes, web page updated 2025-08-18 edition, NIST. Held as: Government work. Publisher page. Cited by: Dissipation factor, Ohm.
• Occupational Safety and Health Act of 1970, OSH Act of 1970, web page edition, OSHA. Held as: Government work. Publisher page. Cited by: Osha.
• OSHA, About OSHA, web page edition, OSHA. Held as: Government work. Publisher page. Cited by: Osha.
• UC Berkeley Physics Experimentation Lab reference 10, Four Wire Measurement (Appendix A, Why So Many Terminals? Understanding impedance measurement techniques), 2001 edition, The Regents of the University of California. Held as: Public page. Publisher page. Cited by: Low-resistance ohmmeter.